Parts List

1 ea. Designer Shelving

1 ea. Mounting Support Bracket

Course Thread Screws

Not Included: Sealant, Liquid Nail, Paint

Determine the location of your Designer shelving on the wall. If possible locate at least 2 studs (depending on the length of shelf in order to mount support bracket.

NOTE: check the wall to determine if it is straight, if not it will be necessary to shim. (If the studs are not located, use of additional Liquid nail will be required, or an adhesive is recommended for additional strength, which should be applied to the Mounting bracket.

Place on the wall and screw into place. Put a bead of adhesive on the wall in the "V " groove so the shelf will make contact when hanging on the wall as shown below. Give the adhesive adequate time to dry.


Sanding may be required depending on your application. Place the shelving over the mounting support bracket pressing down with little pressure to secure the unit. Put one screw in the top back into the wall catching the legend edge (this is only required till the adhesive is dried, optional; then can be removed.

Place a bead of Sealant completely around the system using a damp sponge to remove excess, let it dry according to sealant instructions. Now you are ready to paint the system to match your décor.

Thank you for selecting the Designer Shelving wall systems.



LIMITED WARRANTY
This product is warranted for one year from the date of purchase against 
defects in workmanship and/or materials. At our option parts that prove to be 
defective will either be repaired or replaced the whole unit will be 
replaced. Should unit repairs become necessary during the warranty period, 
send your complete unit, postage or freight prepaid to the manufacturer. Call 
the telephone number listed below to contact the manufacturer. 
Should you need assistance or replacement of the unit give us the style 
number of your unit.  You will find this located inside or back of the unit. 
In either case, a proof of purchase is requested.  This warranty does not 
apply if the damage occurs because of accident, improper handling or 
installation, shipping damage, abuse, misuse, unauthorized repairs made or 
attempted, or the use of the product for commercial service.
ALL WARRANTIES, EXPRESSED OR IMPLIED, LAST ONE YEAR FROM THE DATE OF ORIGINAL 
PURCHASE. THIS WARRANTY DOES NOT COVER LIABILITY FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES FOR ANY CAUSE WHATSOEVER.
Some states do not allow limitations on how any warranty lasts, or the 
exclusion or limitation of incidental or consequential damages, so that the 
above limitations and exclusions may not apply to you.  This warranty gives 
you specific legal rights, which vary, from state to state.

Home Home